Laneshark LS3 Front Mounted Cutter
Find only at Budds Creek Equipment LLC
● Hydraulic implement flow rate ranges from 5gpm to 8.5gpm when using a standard motor, making it suitable for various tractors for sale in Maryland.
● For those seeking higher performance, a high capacity motor with a hydraulic implement flow rate of 8.6gpm to 15gpm is available through special order.
● The third function or Lane Shark valve kit requires that pressure comes solely from the remote, with the return directed to the sump, as it CANNOT RETURN THROUGH AUXILIARY HYDRAULICS.
● It's important to note that we do not recommend rear remote plumbing, as some tractors may lose loader priority, particularly those found among used farm equipment in Maryland.
● Additionally, this setup is NOT COMPATIBLE WITH DIVERTER VALVES and is NOT COMPATIBLE WITH SKID STEERS.
● The minimum dry tractor weight required is 2000lbs, with a minimum tractor width of 55 inches.
● A certified roll over protection system is included for safety.
● For optimal stabilization while operating the Lane Shark, we suggest filling the rear tires of your tractor with water as ballast, along with additional rear weight, such as a box blade or rotary cutter available at Budds Creek Equipment LLC.
Sale Price $4500
● The Lane Shark LS-3 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.
● Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. The Lane Shark has 11 positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions.
● The Lane Shark LS-3 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
● The Lane Shark LS-3 weighs just under 320 lbs.
● When purchasing the Lane Shark LS-3 brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum hose inside diameter of 3/8” is required.
Laneshark LS4 Front Mounted Cutter
Find only at Budds Creek Equipment LLC
● Hydraulic implement flow rate ranges from 5gpm to 8.5gpm when using a standard motor, making it suitable for various tractors for sale in Maryland.
● For those seeking higher performance, a high capacity motor with a hydraulic implement flow rate of 8.6gpm to 15gpm is available through special order.
● The third function or Lane Shark valve kit requires that pressure comes solely from the remote, with the return directed to the sump, as it CANNOT RETURN THROUGH AUXILIARY HYDRAULICS.
● It's important to note that we do not recommend rear remote plumbing, as some tractors may lose loader priority, particularly those found among used farm equipment in Maryland.
● Additionally, this setup is NOT COMPATIBLE WITH DIVERTER VALVES and is NOT COMPATIBLE WITH SKID STEERS.
● The minimum dry tractor weight required is 2000lbs, with a minimum tractor width of 55 inches.
● A certified roll over protection system is included for safety.
● For optimal stabilization while operating the Lane Shark, we suggest filling the rear tires of your tractor with water as ballast, along with additional rear weight, such as a box blade or rotary cutter available at Budds Creek Equipment LLC.
Sale Price $4700
● The Lane Shark LS4 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.
● Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. The Lane Shark has 60+ positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
● Multi-position adjustment rail for added versatility and an extra foot of vertical extension
● Rear rubber skirt and skid shoes for a smoother cutting process
● The Lane Shark LS4 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
● The Lane Shark LS4 weighs just under 450 lbs.
● When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.
Laneshark LS4 Hammerhead Front Mounted Cutter (Hydraulic)
the only patented, hydraulically articulated, multi-position brush cutter for tractors
● Hydraulic implement flow rate ranges from 5gpm to 8.5gpm when using a standard motor, making it suitable for various tractors for sale in Maryland.
● For those seeking higher performance, a high capacity motor with a hydraulic implement flow rate of 8.6gpm to 15gpm is available through special order.
● The third function or Lane Shark valve kit requires that pressure comes solely from the remote, with the return directed to the sump, as it CANNOT RETURN THROUGH AUXILIARY HYDRAULICS.
● It's important to note that we do not recommend rear remote plumbing, as some tractors may lose loader priority, particularly those found among used farm equipment in Maryland.
● Additionally, this setup is NOT COMPATIBLE WITH DIVERTER VALVES and is NOT COMPATIBLE WITH SKID STEERS.
● The minimum dry tractor weight required is 2000lbs, with a minimum tractor width of 55 inches.
● A certified roll over protection system is included for safety.
● For optimal stabilization while operating the Lane Shark, we suggest filling the rear tires of your tractor with water as ballast, along with additional rear weight, such as a box blade or rotary cutter available at Budds Creek Equipment LLC.
Sale Price $9990
● The Lane Shark LS4 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.
● Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. The Lane Shark has 60+ positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
● Multi-position adjustment rail for added versatility and an extra foot of vertical extension
● Rear rubber skirt and skid shoes for a smoother cutting process
● The Lane Shark LS4 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
● The Lane Shark LS4 weighs just under 450 lbs.
● When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.
What you need in order to make this work on your tractor?
You are going to need the appropriate plumbing! There are two options:
- Full C-Flow Hydraulic Kit or
- C-Flow Kit
Full C-Flow Hydraulic Kit
The Lane Shark "C-Flow 3rd Function" is an innovative hydraulic valve kit that optimizes the operational versatility of your tractor. This third function valve kit integrates seamlessly into your existing loader valve, granting you the ability to employ a wide variety of attachments beyond the tractor's first (lift) and second (tilt) functions.
The Lane Shark "C-Flow 3rd Function" Valve Kit offers a unique continuous flow function that enhances your tractor's efficiency and performance. This setup is made possible by a special return line, which forms a closed loop for the hydraulic fluid to circulate continuously throughout the tractor. At the heart of this operation is the LS Switch Handle. When engaged, it holds the hydraulic valve open, ensuring a steady and uninterrupted flow. This feature is particularly beneficial when operating attachments like the Lane Shark Brush Cutter, optimizing its operation for a smoother and more effective land management experience.
The C-flow third-function valve kit is crucial for maintaining the power needed to cut through tree limbs, brush, saplings, and underbrush. This uninterrupted flow allows the Lane Shark hydraulic attachment to operate more smoothly and efficiently, reducing the time and effort required for land management tasks. We offer WR Long third-function kits for an array of front-end loader tractor brands—we’ll help you find the right kit for your machine.
The increased hydraulic capability from the C-flow third-function valve kit doesn’t just save time; it also ensures a more precise and effective cutting action. Clean and accurate cuts allow you to improve the quality of your work. This precision minimizes damage to surrounding vegetation and reduces the likelihood of complications, leading to healthier landscapes and less follow-up maintenance. Shop with Lane Shark USA today for C-flow third-function valve kits to streamline brush cutting and get better results.
C-Flow Kit
The Lane Shark "C-Flow Component Kit" – an innovative solution for those tractors already equipped with a WR Long 3rd Function Valve Kit. Our component kit seamlessly integrates with your existing WR Long 3rd Function setup, unlocking the continuous flow function that takes your tractor's operational efficiency to the next level.
The Lane Shark C-Flow Component offers a unique continuous flow function that enhances your tractor's efficiency and performance. This setup is made possible by a special return line, which forms a closed loop for the hydraulic fluid to circulate continuously throughout the tractor. At the heart of this operation is the WR Long Switch Handle. When engaged, it holds the hydraulic valve open, ensuring a steady and uninterrupted flow. This feature is particularly beneficial when operating attachments like the Lane Shark Brush Cutter, optimizing its operation for a smoother and more effective land management experience.